Manual Configuration - NEC Express5800 series User Manual

36 Operation
Redundancy Type
[No Redundancy]:
Do not provide redundant array configuration.
[With Redundancy]:
Provide redundant array configuration.
3. Click [Finish] to create a logical drive.
3.3.1.2

Manual Configuration

The manual configuration mode allows a logical drive to be created according to a specific request.
The setting procedure is described below.
1. Click [Manual Configuration] in the [Mode Selection] of the Configuration Wizard.
2. Select a physical drive from the Unconfigured Physical Drive List and click the
button to add the physical drive to the Arrays with Available Space.
To recover the added physical drive, select the physical drive and click the
[Add Hotspare To]:
Set the physical disk as the hot-spare disk operating only for the specified array.
[Remove HotSpare]:
Release the setting as the hot-spare disk.
3. Click [Accept]. Then click [Next].
button.