Properties /Operations/Graphical View - NEC Express5800 series User Manual

3.2.3

Properties /Operations/Graphical View

The Properties/Operations/Graphical view indicates the information on controllers and drives
selected in the Physical/Logical View in the Properties view, the setups/executions of available
features in the Operations view, and the capacities of graphical drives in the Graphical view.
Properties
Indicate the information on selected controllers and drives.
Operations
Allows you to set or execute features available for the selected controllers and drives.
IMPORTANT: Setup/execution of feature
In the setup/execution of a feature on the Operations view,
select the desired feature from the menu shown to the left,
change the setting on the window shown to the right if
necessary and select [Go].
The menu displayed in the Operations view varies depending on the states of the selected
objects and/or drives. Sample menus are shown below.
When controller is selected:
[Enable Alarm]:
Enable the alarm feature.
[Disable Alarm]:
Disable the alarm feature.
[Silence Alarm]:
Stop the alarm when it beeps.
[Flash Firmware]:
Update the firmware of the controller.
This operation is dedicated for maintenance. Do not use the feature.
[Set Patrol Read Properties]:
Allow you to set the Patrol Read schedule. See Section "3.5.2 Scheduling Patrol Read"
for the schedule setting.
Operation 25