Table of Contents
Advertisement
Chapter 1 General Description
4.2
Rear View
<Non-redundant power supply model>
7-1
5
4
9
6-1
6-2
10
7-2
10 9
8
2
1
AC Inlet
Sockets for connecting power cords.
2
PCI Slots
Slots for installing PCI cards.
3
Chassis Lock Tab
A tab for locking the side cover.
4
Serial Port (COM 1) Connector
A connector for connecting serial interface devices.
This cannot directly connect to a network line. If the
optional N8117-01A Additional RS232C Connector Kit is
connected, the connector of N8117-01A is assigned as
the serial port 2.
5
Display Connector
A connector for connecting a display
6
USB Connectors
6-1 Connectors for connecting USB3.1 interface devices.
6-2 Connectors for connecting USB3.0 interface devices.
5
7-1
1
6-1
3
6-2
7-2
8
10 9
7
LAN Connectors
7-1 LAN1 Connector
7-2 LAN2 Connector
Connectors for connecting to a network (1000BASE-
T/100BASE-TX /10BASE-T).
If Shared BMC LAN feature is enabled in "ROM Utility"
change to in "BIOS Setup Menu", LAN1 connector can also
be used as the management LAN connector. Sharing port
is not recommended from the point of performance and
security.
Note: Shared BMC LAN only support to LAN1 connector,
8
Management LAN Connector
A LAN connector (1000BASE-T/100BASE-TX /10BASE-T)
for connecting BMC Management Console. This connector
cannot be used as a normal LAN port. This port cannot be
used when Shared BMC LAN feature is used.
9
LINK/ACT LED (green)
LEDs for showing the access status of LAN
10
SPEED LED (green/amber)
LEDs for showing the transfer speed of LAN ports
11
PSU Unit
11-1 PSU Unit 1 (Redundant power supply model)
11-2 PSU Unit 2 (Redundant power supply model)
Express5800/T110j User's Guide
4. Names and Functions of Parts
<Redundant power supply model>
4
11-1
11-2
9
10
2
original LAN1 and Management LAN MAC address
will be invalid.
1
3
23
Advertisement
Table of Contents
