Table of Contents
Advertisement
Chapter 2 Preparations
Installation
Install a PCI card to connect to a PCI slot by using the following procedure.
1.
Before installation, make sure the switch or jumper settings on the PCI card are proper according to
the instruction manual supplied with the card.
2.
See steps 1 to 3 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3.
To remove the side cover, see Chapter 2 (1.3 Removing the Side Cover).
4.
Lift up the PCI retention latch tab until it clicks,
indicating that the lock is released.
5.
Rotate the PCI retention latch toward the rear of the
server and push it back down.
6.
Remove the blank cover aligned with the slot where
you install a card.
Important
Keep the removed blank cover for future use.
Express5800/T110j User's Guide
1. Installing Internal Optional Devices
53
Advertisement
Table of Contents
