Power Cord - NEC EXP339 User Manual

Chapter 2 Preparations

Power cord

Connect the provided power cord to the server.
Non-Redundant Power Supply Model (EXP339)
Redundant Power Supply Model (EXP339A)
When the power cord is connected to an outlet, POWER LED lights amber during initialization of the system.
Note Appearance of the power supply unit varies depending on the model number.
Tips
 To connect the power cord to a UPS, connect it to the outlet provided at the rear
of the UPS.
For details, refer to the instruction manual supplied with the UPS
 In order to link the power supply from the UPS with the power-on/off of this
server, the BIOS settings change might be required depending on the UPS to
which the power cord of this server is connected.
In the BIOS Setup Utility, select Server, and then AC-LINK to change the
parameter to the appropriate value.
 Secure the power cord by AC cable tie attached to the server.
Express5800/T110j User's Guide
2. Installation and Connection
99