NEC Express5800 series User Manual page 15

– Setting reporting measures:
The setting of a reporting measure refers to preparations required for reporting other
than the setting of destinations. This section discusses the structure of each reporting
measure such as "Setting a modem used for Pager call."
However, some reporting measures do not require basic setting. In this case, the
effect is displayed on the screen.
Some reporting measures require setting of functions other than Alert Manager
functions.
Manager report (SNMP) requires a structure of the SNMP service of Windows and
manager report (TCP/IP Out-of-Band) requires a Remote Access Service structure of
Windows. In these cases also, the system indicates on the screen that other settings
are required.
Bitmap
*1 Set in Agent only.
*2 Set in both Agent and Manager.
NOTE:
To report the Alert, make settings by clicking the function
status bitmap and change to green.
Reporting measures
Manager (SNMP) (*1)
Manager (TCP/IP In-Band)
Manager (TCP/IP Out-of-Band)
Internet Mail (*2)
Mail (*2)
Pager (*2)
Pop-up Message (*2)
Print (*2)
Write File (*2)
Run Command (*2)
Report to Client (*1)
Critical error log (*1)
*This measures is not indicated in setting dialog.
Using the Alert Manager
(*1)
(*1)
11