NEC Express5800 series User Manual page 36

Using the Alert Manager
32
IMPORTANT:
number in the range of 6001 to 65535.
Clicking the [Default] button resets the number to the default value
(31134).
If a modification is made, be sure to also modify the setting for the
remote manager.
receive in the [Receive from Agent (TCP/IP) Setting] dialog of the base
setting by executing the Alert Manager setting tool on the server in
which Manager is installed.
– [OK]:
Set information is added and this dialog box closes.
– [Cancel]:
This dialog box closes with no set information added.
– [Test]:
For the test report, press this button.
The test result can be checked by a message.
Manager Report (TCP/IP Out-of-Band)
No base setting is required.
Before setting the destination, make configuration of the Remote Access Service. Additionally set
an entry of the Remote Access Service.
If the entry of the Remote Access Service is not set, no destination setting can be made.
For the destination settings, make the following settings.
If the default value does not work, set the port
This modification is made in the setting of TCP/IP