Setting According To Report Method - NEC Express5800 series User Manual

Using the Alert Manager
30
– Remove button:
IDs selected from the Report To list are moved to the Destination ID list.
– ID list:
Information for IDs selected from the Destination ID and Report To lists is displayed.
– Group list:
Information for IDs selected from the Destination ID and Report To lists is displayed.
To Make a Setting
1.
Select the ID to be reported from the Destination ID list.
2.
Clicking on Add moves the ID to the Report To list.
3.
To delete IDs from report objects, select the ID from Report To list and click on Remove
to move the ID to the Destination ID list.
4.
Click on OK.

Setting According to Report Method

To set the base setting
Use the [Report] property sheet of the [Base Setting] dialog to select the method from the
list and make the setting in the dialog displayed by pressing the [Configure...] button.
To report the Alert, make settings by clicking the function status bitmap and change to
green.
To set destination setting
Select the method from the method list at the time of ID setting in the [Destination
Setting] dialog and make the setting in the dialog displayed by pressing the [Address...]
button.
Manager Report (SNMP)
No item is provided to set in Alert Manager for the base setting and destination setting.
Make the setting of the SNMP service in Control panel [Network] of Windows.
Set also a destination of the remote manager using the SNMP service.
Manager Report (TCP/IP In-Band)
No base setting is required.
Make the following setting for destination setting.