NEC Express5800 series User Manual page 48

Using the Alert Manager
44
The value (second) which can be set for "," depends on the setting of the "S8" register
(pause time) of the used modem. For more information, see the guide of the modem.
"01234"
Sending message
",,,"
Termination standby time is set (a sending termination time is adjusted).
"#"
This is the termination symbol to informing of the message termination.
termination symbol varies by the used pager.
NOTE:
For more information, see the guide for the pager.
If duplicate setting is made, more than one alert will be reported.
– [OK]:
Set information is added and this dialog box closes.
– [Cancel]:
This dialog box closes with no set information added.
– [Test]:
Pressing the [Test] button runs a test of sending to the set pager.
The result is displayed in a message box. If an error occurs, make the setting again
according to the message contents.
Depending on the pager, characters to be displayed vary.
A