NEC Express5800 series User Manual page 38

Using the Alert Manager
34
– [Port number]:
The port number used for the communication between sockets can be set.
For this number, the same value must be set to the Agent and remote Manager (the
default value is 31134 for both Agent and remote Manager).
Do not change the value as long as the default value works.
IMPORTANT:
in the range of 6001 to 65535.
Clicking the [Default] button resets the number to the default value
(31134).
If a modification is made, be sure to also modify the setting for the
remote manager.
receive in the [Receive from Agent (TCP/IP) Setting] dialog of the base
setting by executing the Alert Manager setting tool on the server in
which Manager is installed.
– [OK]:
Set information is added and this dialog box closes.
– [Cancel]:
This dialog box closes with no set information added.
– [Test]:
For the test report, press this button.
The test result can be checked by a message.
If the default value does not work, set the port number
This modification is made in the setting of TCP/IP