Sharp CD-80W Operation Manual page 10

(Continued)
110V
The International Telecommunication Union (ITU) has established
that member countries should maintain either a 10 kHz or a 9
kHz interval between broadcasting frequencies of any AM station.
The illustration shows the 9 kHz interval zones (regions 1 and
3), and the 10 kHz interval zone (region 2).
Before using the unit, set the SPAN SELECTOR switch (on the
rear panel) to AM tuning interval (span) of your area.
To change the tuning zone:
1
2
3
Caution:
Check the setting of the AC voltage selector located on the rear
panel before plugging the unit into an AC socket. If necessary,
adjust the selector to correspond to the AC power voltage used
in your area.
Selector adjustment:
Turn the selector with a screwdriver until the appropriate voltage
number appears in the window (110V, 127V, 220V or 230V -
240V AC).
Notes:
To an AC socket
E-9
AM/FM interval (span)
Press the ON/STAND-BY button to enter the stand-by mode.
Set the SPAN SELECTOR switch to "50/9" for 9 kHz AM
interval (50 kHz FM interval), and "100/10" for 10 kHz AM
interval (100 kHz FM interval).
Whilst pressing down the
button, hold down the ON/STAND-BY button for at least 1
second.
"CLEAR AL" will appear.
The operation explained above will erase all data stored in
memory including clock and timer settings, and tuner and CD
presets.
Connecting the AC power lead
Plug the AC power lead into a convenient AC socket, after
any connections.
Unplug the AC power lead from the AC socket if the unit will
not be in used for a prolonged period of time.
Never use a power lead other than the one supplied. Use of
a power lead other than the one supplied may cause an electric
shock or fire.
0
button and the X-BASS/DEMO