Table of Contents
Advertisement
RECORDING
When recording important selections, be sure to
make a preliminary test to ensure that the desired
material is being properly recorded.
The volume and sound quality can be adjusted with
no effect on the recorded signals (Variable Sound
Monitor).
1
2
6
3
5
6
2
1
1
2
3
CD
A
TAPE
1
2
3
5
6
4
PUSH
EJECT
TAPE 2
6
4
5
B
4
5
Metal and CrO
tapes should not be used for recording or
2
dubbing.
Recording from the built-in CD player
(CD Synchronised Recording System)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button and load the desired disc.
Use the APMS function to store the tracks you want to record
in memory. (See page 15.)
3
Load a cassette into the TAPE 2 cassette compartment.
Load the tape with side A (1) facing you.
Wind past the leader of the tape, on which recording can not
be performed.
4
Press the
button.
... To record on only one side.
... To record on both sides.
5
Press the REC PAUSE (
"SYNC" and "REC" will flash.
6
Press the
(
) button to record on side A (1), or the
0
0 R
button to record on side B (2).
"SYNC" will disappear and "REC" will light up.
CD playback will start approximately 5 seconds after the tape
starts.
To record on both sides, begin on side A (1). [If recording is
started from side B (2), the tape will not switch over to side
A (1).]
To stop recording:
Press the
button.
The CD and tape will stop.
Auto restart function:
When recording continuously on both sides of the
tape:
Even if the last track of side A (1) is not finished recording, side
B (2) will automatically start recording from the beginning of that
track.
The recording will be made without cutting the beginning of the
track on side B (2).
E-19
) button.
6
1
Advertisement
Table of Contents
