authenticate --join --domain <domain name>
[--ou <org-unit name>]
--user <user name>
authenticate --leave [--user <user name>]
[--force]
authenticate --update --kerberos
authenticate --add [--user <user name>]
[--login_group <DOMAIN\LOGIN GROUP>]
authenticate --delete [--user <user name>]
[--login_group <DOMAIN\LOGIN GROUP>]
authenticate --set --user <user name>
authenticate --guestmode [--enable]
[--disable]
authenticate --server_signing [--auto]
[--mandatory]
[--disabled]
[--show]
authenticate --help
authenticate <command> <command-arguments>
<command> can be one of:
--show
Displays current ADS domain, authorized local CIFS users, and
login group.
--join
Joins an ADS domain.
--leave
Leaves an ADS domain.
--update
Updates ADS configuration.
--add
Creates local workgroup user for CIFS authentication or adds
login group.
--delete
Deletes local workgroup user from CIFS authentication or
deletes login group.
--set
Sets password for a local workgroup user.
--guestmode
Configures all CIFS shares for guest only access.
--server_signing Configures server signing for CIFS.
For command-specific help, please type authenticate --help <command>
For example:
authenticate --help show
Network
This set of DR Series system CLI commands lets you perform the following network-related tasks:
•
Display information about a DR Series system
•
Manage an existing networking configuration
•
Restart networking
•
Configure the DR Series system to use DHCP or static IP addressing
•
Configure servers in the domain name system (DNS)
•
Update the bonding mode or maximum transmission unit (MTU)
•
Look up the IP address or hostname for a specific destination
•
Start a packet trace route for a specific network host
34