Maintenance --Filesystem [--Start_Scan [Verify_Data]]; Maintenance --Filesystem [--Stop_Scan] - Dell PowerVault Storage Area Network Reference Manual

Syntax
maintenance --filesystem --clear_quarantine
Result
Successfully performed quarantine cleanup.

maintenance --filesystem [--start_scan [verify_data]]

Description
Starts the filesystem scan process that acts to verify the data contained in a DR Series system.
NOTE: Be aware that using this command places the filesystem into a read-only mode and pauses all active
replications. When the DR Series system enters Maintenance mode, an alert is sent that indicates this operational
change.
Syntax
maintenance --filesystem --start_scan
Result
This operation will make the filesystem read-only and pause all active
replications.
Do you want to continue (yes/no) [n]? y
Please enter the administrator password:
Filesystem check started successfully.
To see the status, please execute "maintenance --filesystem--scan_status".
If you enter the DR Series system CLI maintenance --filesystem command (see the following example) when the DR
Series system is not in Maintenance mode, the following output is displayed at the system prompt:
maintenance --filesystem --scan_restart
"Operation not supported as system is not in maintenance mode.
To be able to restart scan, filesystem check must be running or waiting".

maintenance --filesystem [--stop_scan]

Description
Stops the filesystem scan process that verifies the data contained in a DR Series system.
Syntax
maintenance --filesystem --stop_scan
Result
This operation will stop the filesystem checker and put the system back into
operational mode.
Do you want to continue (yes/no) [n]? y
Please enter the administrator password:
Filesystem check stopped successfully.
94