Maintenance --Hardware --Reinit_Nvram; Maintenance --Hardware --Restore_Hw_Db; Maintenance --Hardware --Network_Reconfigure - Dell PowerVault Storage Area Network Reference Manual

Do you want to continue (yes/no)?
stop Filesystem... Done.
Initializing Dictionary... Done.
Restart Filesystem... Done.
maintenance --hardware [--reinit_nvram]
Non-volatile RAM (NVRAM) is the type of memory that retains its contents even when power to it is turned off. This is an
important component of the DR Series system that is crucial to normal data operations
Description
Initializes the NVRAM that resides on the Dell DR4000 hardware appliance on which the DR Series system software is
installed.
CAUTION: Carefully consider before attempting to use the DR Series system CLI --reinit_nvram command. This
command should only be used under the direction of Dell Support because it permanently erases all data stored on
the NVRAM in the Dell DR Series system hardware appliance. This command is only to be used when replacing the
NVRAM in your hardware appliance. Contact Dell Support and seek assistance before you use this command.
Syntax

maintenance --hardware --reinit_nvram

Result
Please enter administrator password:
WARNING: ALL NVRAM DATA WILL BE ERASED!
Do you want to continue (yes/no)?
Type yes to continue or no to return to the system prompt.
maintenance --hardware [--restore_hw_db]
Description
Restores and repairs the Hardware Health Monitor database for a DR Series system.
Syntax

maintenance --hardware --restore_hw_db

Result
WARNING: All previous Event & Alert information will be deleted.
Do you want to continue? (yes/no) [n]? y
Please enter the administrator password:
The Hardware Health Monitor has been successfully restored.
maintenance --hardware [--network_reconfigure]
Description
Reconfigures the network interface for a DR Series system.
Syntax

maintenance --hardware --network_reconfigure

96