Dell 5210n Mono Laser Printer User Manual page 70

Cancel not available
Cancelling
Change <src> <Custom Type Name>
Change <src> <Custom String>
Change <src> <size>
Change <src> <type> <size>
Check duplex connection
Check tray <x> connection
Clearing job accounting statistics
Close Door or Insert Cartridge
Copies
Defragmenting Flash
DO NOT POWER OFF
Delete
Delete all
Delete all confidential jobs
Deleting
Disabling DLEs
Disabling Menus
Enabling Menus
Enter PIN
Enter PIN to lock
Flushing buffer
Formatting Flash
DO NOT POWER OFF
Hex Trace
Insert Tray <x>
Install bin <x>
Install duplex
Install envelope feeder
Install tray <x>
Wait for the message to clear.
Wait for the message to clear.
Press the Select button
l
Select Use current to print on media currently in the printer.
l
Cancel the current job.
l
Turn the printer off and back on. If the error recurs, turn the printer off, unplug the power cord from the wall
l
outlet, and then remove the duplex unit. Reattach the duplex unit, connect the power cord to a properly
grounded outlet, and restart the printer. For more information, see
If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and then remove the
specified device, and call for service.
Press the Select button
l
Turn the printer off and back on. If the error recurs, turn the printer off, unplug the power cord from the wall
l
outlet, and then remove the specified tray. Reattach the tray, connect the power cord to a properly grounded
outlet, and restart the printer. For more information, see
If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and then remove the
specified device, and call for service.
Press the Select button
l
Wait for the message to clear.
Close the upper front door.
l
Install the toner cartridge.
l
Enter the desired number of copies.
Wait for the message to clear.
NOTE: Do not turn the printer off while this message is displayed.
Press the Select button
l
Press Stop to cancel the operation.
l
Press the Select button
l
Press Stop to cancel the operation.
l
Press the Select button
l
Press Stop to cancel the operation.
l
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
NOTE: While the menus are disabled, you cannot change the printer settings from the operator panel.
Wait for the message to clear.
Enter the PIN you identified in the driver when you sent the confidential job to the printer.
Enter the correct pin number to lock the operator panel and prevent menu changes.
Wait for the message to clear.
Wait for the message to clear.
NOTE: Do not turn the printer off while this message is displayed.
The printer is in Hex Trace mode.
Insert the specified tray into the printer.
Turn the printer off, unplug the power cord from the wall outlet, install the specified bin, connect the power
l
cord to a properly grounded outlet, and then restart the printer. For more information, see
Sheet or 500-Sheet Drawer.
Cancel the current job.
l
Turn the printer off, unplug the power cord from the wall outlet, install the duplex unit, connect the power
l
cord to a properly grounded outlet, and then restart the printer. For more information, see
Unit.
Cancel the current job.
l
Turn the printer off, install the envelope feeder, and restart the printer. For more information, see
l
an Envelope Feeder.
Cancel the current job.
l
Turn the printer off, unplug the power cord from the wall outlet, install the specified tray, reconnect the power
l
cord to a properly grounded outlet, and then restart the printer. For more information, see
Sheet or 500-Sheet Drawer.
Cancel the current job.
l
if you have changed the media.
to clear the message and print without using the device.
Installing a 250-Sheet or 500-Sheet
to clear the message and print without using the device.
to delete the specified job.
to delete all confidential jobs.
to delete all held jobs.
Installing a Duplex Unit.
Drawer.
Installing a 250-
Installing a Duplex
Installing
Installing a 250-