Dell 5210n Mono Laser Printer User Manual page 72

Reattach bins <x> - <y>
Reattach envelope feeder
Remote Management Active
DO NOT POWER OFF
Remove paper from bin <x>
Remove paper from all bins
Remove paper from
<linked set bin name>
Remove paper from standard output
bin
Resetting Active Bin
Resetting the Printer
Restoring Factory Defaults
Restoring held job(s) x/y
Some held jobs were lost
Standard Bin Full
Submitting selection
Toner Low
Tray <x> Empty
Tray <x> Low
Tray <x> Missing
USB
USB <x>
View supplies
Waiting
Turn the printer off and back on.
l
If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the
¡
specified bins, then reattach the bin to the printer, r, and then restart the printer.
If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the
¡
specified bin, and call for service.
Press the Select button
l
Turn the printer off and back on.
l
If the error recurs, turn the printer off, remove the envelope feeder, then reattach the envelope feeder
¡
to the printer.
If the error recurs, turn the printer off, remove the envelope feeder, and call for service.
¡
Press the Select button
l
The printer settings are being configured, and the printer was taken offline to ensure it is not currently printing and
processing jobs.
Wait for the message to clear.
Remove the stack of paper from the specified bin(s).
Remove the paper from all output bins.
The printer automatically senses media removal and resumes printing.
If removing the media does not clear the message, Press the Select button
Remove the paper from the standard bin.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
NOTE: When factory default settings are restored:
All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted.
l
All menu settings return to the factory default setting except:
l
The Display Language setting in the "Setup" Menu.
¡
All settings in the "Parallel" Menu, "Network" Menu, "Infrared" Menu, "LocalTalk" Menu, and "USB"
¡
Menu.
Wait for the message to clear.
l
Select Quit restoring to delete unrestored Print and Hold jobs.
l
NOTE: x represents the number of the job being restored, and y represents the total number of jobs to be
restored.
Press the Select button
l
The printer frees memory by deleting the oldest held job and continues deleting held jobs until there is
enough printer memory to process the job.
Cancel the current job.
l
Remove the stack of paper from the bin to clear the message.
Wait for the message to clear.
Replace the toner cartridge.
l
Press Select to clear the message and continue printing.
l
Load paper in the tray to clear the message.
Add paper to the tray to clear the message.
Insert the tray into the printer.
The printer is processing data through the specified USB port.
Displays the current level of all printer supplies.
The printer has received a page of data to print, but is waiting for an End of Job command, a Form Feed command,
or additional data.
Press the Select button
l
Cancel the current job.
l
to clear the message and print without using the specified bins.
to clear the message and print without using the envelope feeder.
to clear the message and continue printing.
to print the contents of the buffer.
.