Installing And Removing Options; Order Of Installation - Dell 5210n Mono Laser Printer User Manual

Installing and Removing Options

Order of Installation
Installing a 250-Sheet or 500-Sheet Drawer
Installing a Duplex Unit
Installing an Output Expander
Installing an Envelope Feeder
Installing Printer Memory
Installing Font ROMs

Order of Installation

Floor-mounted configurations require additional furniture. You must use either a printer stand or printer base if you are using more than one input option or a
duplex unit and an input option.
NOTE: Furniture options may not be available in all regions. Contact your Dell Sales Representative to determine furniture availability.
CAUTION: If you are installing options after setting up the printer, turn the printer off, and unplug the power cord before continuing.
Install the printer and any options you have purchased in the following order:
Printer stand or printer base
l
250-sheet or 500-sheet drawer
l
Duplex unit
l
Printer
l
NOTE: You can install up to four optional paper trays, or three trays and a duplex unit.
CAUTION: The printer requires two people to lift it safely.
CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if
you are using more than one input option or a duplex unit and an input option.
For information on installing a printer stand or printer base, see the instructions included with the option.
Installing a 250-Sheet or 500-Sheet Drawer
NOTE: You can install up to four optional paper trays, or three trays and a duplex unit.
Optional drawers attach under the printer and optional duplex unit. A drawer consists of a tray and a support unit. The 250-sheet drawer and the 500-sheet
drawer are installed the same way.
1. Remove the tray from the support unit. Remove all packing material and tape from both the support unit and the tray.