4.6.13
READ LONG command
Bit
7
Byte
0
1
Logical Unit Number
2-5
6
7-8
9-11
The READ LONG command reads data in the data, CRC, and ECC sections from the specified
logical block address.
The transfer byte length must be a multiple of 600 (X'258') bytes for 512 byte media and a multiple
of 2380 (X'94C') bytes for 2048 byte media.
4.6.14
RECEIVE DIAGNOSTIC RESULTS command
Table 4.93 RECEIVE DIAGNOSTIC RESULTS command
Bit
7
Byte
0
1
Logical Unit Number
2
3-4
5-11
The RECEIVE DIAGNOSTIC RESULTS command transfers the diagnostic results indicated by
the SEND DIAGNOSTIC command to the host.
command must be issued following the SEND DIAGNOSTIC command.
successively or if there is no data to be transferred, the command transfers no data and ends
normally.
Table 4.92 READ LONG command
6
5
4
Operation Code (3Eh)
Logical Block Address
Reserved
Byte Transfer Length
Reserved
6
5
4
Operation Code (1Ch)
Reserved
Allocation Length
Reserved
C156-E142-02EN
3
2
1
Reserved
3
2
1
Reserved
The RECEIVE DIAGNOSTC RESULT
0
0
If not issued
4 - 61