Fujitsu MCE3064AP Product Manual page 64

(3) Installation
a) Do not connect or disconnect the connectors or change the terminal settings when the power is
on.
b) Do not move the drive with the power on.
c) Eject the optical disk cartridge, lock the carriage securing the head, turn off the power, then
move the drive.
Device damage
Be sure to turn on the power supply before inserting your cartridge for
the first time. It releases the device from transport protection and
enables you to insert the cartridge.
The device may be damaged if you insert the cartridge without
releasing the protection. From the next time, you don't need to turn on
the power supply beforehand.
Before moving the drive, remove the optical disk cartridge. If the drive
is moved with the optical disk cartridge loaded in it, the head may
move back and forth in the drive to damage the head or disk and
reading the data may fail.
(4) Packaging
a) Before packaging, remove the optical cartridge.
b) Store the drive in an antistatic plastic bag with desiccant (silica gel).
c) Use the same cushions and packaging supplied with the drive. If they are not available, ensure
that adequate shock absorbent material is used. In this case, some method of protecting the
PCA surface and interface connectors must be used.
d) Apply "UP" and "Handle With Care" labels to the outside of the package.
Figure 3.16 shows the individual packaging style and Figure 3.17 shows the gathered packaging
style. (The form and material of the cushion may be changed.)
3 - 18 C156-E142-02EN