Fujitsu MCE3064AP Product Manual page 93

Word Value
69-70 0000h
71 07D0h (2000)
72 03E8h
(1000)
73-79 0000h
80 0010h
81 0000h
82 4278h
83 4000h
Table 4.20 Device parameter information (3/5)
Bits
Reserved
Required time after the PACKET command is received until the bus
is released ("s) (Typical)
Required time after the SERVICE command is received until BSY
is cleared ("s) (Typical)
Reserved
Major Version number (ATA/ATAPI-4)
Minor Version number (unused)
Command set supported
(A value of less than 1 indicates that the command is supported.)
15 IDENTIFY DEVICE DMA command (B'0')
14 NOP command (B'1')
13 READ BUFFER command (B'0')
12 WRITE BUFFER command (B'0')
11 WRITE VERIFY command (B'0')
10 Host protect area function (B'0')
9 DEVICE RESET command (B'1')
8 SERVICE command interrupt (B'0')
7 Interrupt at release (B'0')
6 Read ahead cache (B'1')
5 Write cache (B'1')
4 Packet command function (B'1')
3 Power management function (B'1')
2 Removable media function (B'0')
1 Security mode (B'0')
0 SMART function (B'0')
Command set supported
(A value of less than 1 indicates that the command is supported.)
15 Always B'0'.
14 Always B'1'.
13-1 Reserved
1 DOWNLOAD MICROCODE command supported (B'0')
C156-E142-02EN
Description
4 - 25