Sata Settings Screen; Boot Settings Screen - Dell PowerVault DL4000 Owner's Manual

Menu Item Description
Execute Disable Allows you enable or disable execute disable memory protection technology. By default, the
Execute Disable option is set to Enabled.
Logical Processor Allows you to enable or disable the OS capability to put logical processors in the idling state in
Idling order to reduce power consumption. By default, the option is set to Disabled.
Number of Cores per Allows you to control the number of enabled cores in each processor. By default, the Number
Processor of Cores per Processor option is set to All.
Processor 64-bit Specifies if the processor(s) support 64-bit extensions.
Support
Processor Core Displays the maximum core frequency of the processor.
Speed
Processor Bus Speed Displays the bus speed of the processors.
Processor 1
Family-Model- Displays the family, model and stepping of the processor as defined by Intel.
Stepping
Brand Displays the brand name reported by the processor.
Level 2 Cache Displays the total L2 cache.
Level 3 Cache Displays the total L3 cache.
Number of Cores Displays the number of cores per processor.

SATA Settings Screen

Menu Item Description
Embedded SATA Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID modes. By default, the
Embedded SATA option is set to AHCI.
Port E Auto enables BIOS support for the device attached to SATA port E. Off disables BIOS support
for the device. By default, Port E is set to Auto.
Port F Auto enables BIOS support for the device attached to SATA port F. Off disables BIOS support
for the device. By default, Port F is set to Auto.

Boot Settings Screen

Menu Item Description
Boot Mode Allows you to set the boot mode of the system.
NOTE: The processor bus speed option displays only when both the processors are
installed.
NOTE: The following settings are displayed for each processor installed in the system.
19