Dell PowerVault DL4000 Owner's Manual page 89

Error Code Message Information
FAN0000
Message
Details
Action
FAN0001
Message
Details
Action
FAN1201
Message
Details
Action
HWC1001
Message
Details
Action
HWC2003
Message
Details
Action
HWC2005
Message
Details
Action
MEM0000
Message
2. Turn off the system and remove input power for one minute.
3. Ensure the processor is seated correctly.
4. Reapply input power and turn on the system.
5. If the issue persists, see
number > RPM is less than the lower warning threshold.
Fan <
Fan operating speed is out of range.
Remove and reinstall the fan. If the issue persists, see
number > RPM is less than the lower critical threshold.
Fan <
Fan operating speed is out of range.
Remove and reinstall the fan. If the issue persists, see
Fan redundancy is lost.
Fan has failed.
Remove and reinstall failed fans or install additional fans.
name > is absent.
The <
The absent device may be necessary for proper operation. System
functionality may be degraded.
Reinstall or reconnect the hardware.
name > cable is not connected, or is improperly
The storage <
connected.
The cable may be necessary for proper operation. System
functionality may be degraded.
Check if the cable is present, then reinstall or reconnect.
name > cable is not connected, or is improperly
The system board <
connected.
The cable may be necessary for proper operation. System
functionality may be degraded.
Check if the cable is present, then reinstall or reconnect.
Persistent correctable memory errors detected on a memory device
location >.
at location(s) <
Getting Help.
Getting
Getting
Help.
Help.
89