Dell PowerVault DL4000 Owner's Manual page 64

Dell powervault dl4000 systems owner's manual

Hide thumbs Also See for PowerVault DL4000:

Table of Contents

c) Pull the mini SAS cable out of the connector on the system board.

a. mini SAS cable connector

b. metal tab

c. connector on the system board

Disconnect all other cables from the system board.

CAUTION: Take care not to damage the system identification button while removing the system board from

the chassis.

Grasp the system-board holder, lift the blue release pin, slide the system board toward the front of the system, and

lift the system board out of the chassis.

CAUTION: Do not lift the system board assembly by grasping a memory module, processor, or other

components.

Figure 30. Removing and Installing the System Board

1. system board

2. system-board holder

3. release pin

Table of Contents

Troubleshooting