Table of Contents
Advertisement
No.
Item
14
Noise (ISO 7779)
15
Ozone emission
16
Print quality
Notes:
1) This specification applies to the
recommended paper.
2) The print area is as specified in
No. 11.
3) The environmental conditions
are: 10 to 32.5˚C, 20 to 80%
RH.(max wet-bulb 29˚C)
17
Print precision
Notes:
1) This specification applies to the
recommended paper.
2) The print area is as specified in
No. 11.
3) The environmental conditions
are: 10 to 32.5˚C, 20 to 80%
RH.
4) At room temperature and
humidity
18
Printing defects (*12, *13)
Notes:
1) This specification applies to the
recommended paper.
2) The environmental condidtons
are: 10 to 32.5˚C, 20 to 80%
RH.
19
Paper transport stability (*13)
Notes:
1) This specification applies to the
recommended paper.
2) No options
To be continued to the next page
3-4
Specification
Printing with 1st paper tray
with 2nd/3rd paper tray (incl duplex print) 52 dBA or less
with 4th paper tray (incl duplex print)
Reference: with multi-function feeder
Standby mode
0.08 ppm or less (within 28 m
printing, 25˚C 50%RH)
According to UL478 Section 45 test procedure
Density
Screen
Resolution
The following vertical line and horizontal line are
discernible.
600 dpi: 2-dot line/3-dot space
1200 dpi: 4-dot line/5-dot space
Fusibility
75% or more (average of 9 points of OD ratios per
sheet, room temperature and humidity, tape peeling
method, recommended paper)
Dot pitch
Single line pitch
Cumulative line pitch (Note 4) 0.8% or less at over 1/6-inch pitch
Linearity
Parallelism
Perpendicularity
Registration
Skew
Smearing
OD ratio: 0.02 or less
Black dot
0.3 to 1.0 mm: 8 max. per drum cycle and
0.6 to 1.0 mm: 1/drum cycle max.
White dot
0.3 to 1.2 mm: 8 max, per drum cycle and
0.8 to 1.2 mm: 1/drum cycle max.
Jam (including pick error): single-sided; 1/3,000 sheets
Double feed: 1/2,000 sheets
Conditions and environment
• Loading errors are to be excluded. (The loading procedure is as
specified in the user's manual.)
• The uppermost and lowermost sheets of paper in a package are to
be removed.
• Paper feeding errors due to sheets at the boundary between old
stack of paper and new stack of paper are to be excluded.
• The maximum number (250/500) of sheets of paper are to be
loaded on the paper tray at a time.
• 23˚C and 50% RH
• Recommended paper
• Size: A5, A4, A3, Letter, Legal, Executive, Ledger, JIS-B4, JIS-
B5
2
tightly-closed environment, 6 hours
Level
OD ratio: 0.9 or more
Difference
OD ratio: 0.3 or less
Main scan direction:
Subscan direction: 20%
0.6 mm or less at 1/6-inch pich
0.6 mm/200 mm
1.0 mm/200 mm
1.2 mm/200 mm
Left side: 5 2.5 mm
Top: 5 2.0 mm (at the width center)
0.5˚ or less (2.53 mm/290 mm)
double-sided; 1/1,500 sheets
50 dBA or less
54 dBA or less
53 dBA or less
40 dBA or less
5%
Advertisement
Table of Contents
