Table of Contents
Advertisement
The following shows the structure of the menus in menu mode. An asterisk (*) indicates a default option.
Menu Mode
Page Format Menu
Quality Menu
PCL Font Menu
PCL Menu
FPS Menu
Config Menu
Parallel Menu
Serial Menu
Network Menu
Clear Warning
Self Test Menu
Font Print Menu
Tray Select Mode
MFF Paper Size Mode
Copies
– 001* to 999
Paper/Envelope
– A4* (Europe), A5, Letter* (USA), Legal, Executive, COM-10, DL, Monarch, B5, C5
Orientation
– Portrait* or Landscape
Form Lines
– 060* (USA), 064* (Europe), or 005 to 128
Page Protect
– Auto* or On
Duplex Mode (†)
– Off* or On
Binding (†)
– Long Edge* or Short Edge
Smoothing (FEIT) – On* or Off
Resolution
– 600* or 300 dpi
Economy Mode
– Off* or On
Thick Paper
– Off* or On
Font Source
– Internal*, Soft, SIMM
Font Number
– 000*, 001, 002, ..., N (depending on the font source, max. 999)
Pitch Size
– 0.44* to 99.99 (characters/inch, 0.01 increments)
Point Size
– 4.00* to 999.75 (point, 0.25 increments)
Symbol Set
– Roman 8*, ISOL1, ISOL2, ISOL5, PC8, etc...
Courier
– Regular* or Dark
Top Offset
– 0.0* or –25.0 to +25.0 (mm, 0.1 increments)
Left Offset
– 0.0* or –25.0 to +25.0 (mm, 0.1 increments)
A4 Print Width
– Normal* or 80 Columns/Line
Auto Attach FF
– No* or Yes
Auto CR
– LF* or LF+CR
Auto LF
– CR* or CR+LF
Jam Recovery
– Off* or On
Print FPS Errors
– On* or Off
Job Timeout
– 0* or 10 to 300 (0: no check)
Wait Timeout
– 0 or 10 to 300* (0: no check)
Manual Timeout
– 60*, 0 or 10 to 300 (0: no check)
Model Selection
– Auto Model*, Memory Model, Speed Model
Personality
– Auto*, PCL, PS
Auto Continue
– Off* or On
I/O Timeout
– 15* or 5 to 300 (seconds)
I/O Buffers
– Auto*, 32K, 64K, 128K, 256K (bytes)
Power Save
– On after 15 min*, 30 min, 60 min, 120 min, Off
Acknowledge
– ACK Width 1*, ACK Width 2, ACK Width 3
Bi-direction
– On* or Off
NPAP Mode
– Auto* or On, Off
Baud Rate
– 1200, 2400, 4800, 9600*, 19200, 38400, 57600
Pacing
– DTR* or Xon/Xoff
DTR Porality
– Hi* or Low
ROBUST XON
– On* or Off
NPAP Mode
– Auto* or On
BootP
– No* or Yes
IP Address
– ###, ###, ###, ### (### = 0, 1, 2, ..., 255)
IP Netmask
– ###, ###, ###, ### (### = 0, 1, 2, ..., 255)
IP Gateway
– ###, ###, ###, ### (### = 0, 1, 2, ..., 255)
<Clear Warning> – Print Unit
PCL Page Config
– Start
FPS Page Config (††) – Start
PCL Font List
– Start
FPS Font List (††) – Start
Tray
– Tray 1*, Tray 2, MFF
Manual Feed
– Off* or On
MFF Paper/Envelope – A4* (Europe), A5, Letter* (USA), Legal, Executive, COM10, Monarck, C5, DL, B5
† Displayed when an optional
duplex unit is installed.
†† For PP16DV, displayed when an optional FPS is installed.
4-3
Advertisement
Table of Contents
