Motorola 110502USM001 - Vanguard 60 Router User Manual page 76

Configure LAN Connections
3-26
IP Precedence for Voice Traffic
Default 0
Range 0-7
0 - Routine
1 - Priority
2 - Immediate
3 - Flash
4 - Flash Override
5- Critical/ECP
6 - Internetwork Control
7 - Network Control
Description Specifies the IP Precedence for provided FAST PATH service for
voice packets. Enter a non-zero value to enable.
If the voice module in the Vanguard has already classified an
incoming packet as voice class, the IP precedence in the packet
will be set to the configured IP precedence value.
If the incoming packet has not been classified, the IP precedence
in the packet will be compared against the configured IP
precedence value. If the values match, then the incoming packet is
classified as voice class and receives FAST PATH service.
RTP/UDP/IP Header Compression
Default DISABLE
Range DISABLE, TRANSMIT, RECEIVE, DUPLEX, AUTODETECT
Description Enables or disables header compression on this LCON:
• DISABLE - disables header compression.
• TRANSMIT - indicates that compressed packets are
transmitted but not received.
• RECEIVE - indicates that compressed packets are received
only but not transmitted.
• DUPLEX - indicates that compressed packets are received
and transmitted.
• AUTODETECT- indicates that if the incoming traffic is
compressed then the outgoing traffic will be compressed.
Note
RTP/UDP/IP header compression parameters only appear if
Encapsulation Type is set to RFC 1294.
Configuring a Vanguard Router