Table of Contents
Advertisement
MAIN MENU
There are two ways to enter the Main Menu when the receiver is powered on:
x
On the remote control, press the "MENU"
button.
x
Alternatively, press "MENU" button on the
front panel.
x
Use the directional buttons to navigate
through the menu, "ENTER" button to choose
specific items, and "EXIT" button to return to
the main menu from submenu or to leave the
main menu.
INSTALLATION
On the main menu, select "INSTALLATION" and key-in your password to enter the "INSTALLATION"
page. The default password is 0000. Please refer to page 33 to change the password.
If you are in Australia, you have choices of MANUAL SETUP / AUTO SCAN / QUICK SCAN to tune the
receiver. If you stay in other region, please use MANNUAL SETUP to tune the receiver.
MAIN MENU
QUICK SCAN (For Australia Only)
The "QUICK SCAN" feature allows you to scan all predefined digital TV channel signals in Australia.
x
On the installation page, highlight "QUICK
SCAN" and press the "ENTER" button.
x
Use the " " and " " buttons to highlight the
city you live in and press the "ENTER" button
to start scanning.
x
It will scan through respective RF channels
available in your city.
x
Once a digital TV channel is found, the
channel number and programs names in this
INSTALLATION
QUICK SCAN
(for Australia only)
AUTO SCAN
(for Australia only)
MANUAL SETUP
RESET DATA
S/W UPDATE
25
Advertisement
Table of Contents
