Aux; Sleep - Toshiba HD-S25 Owner's Manual

AUX

If your TV only has only one set of Component Video inputs, this AUX feature allows you to play your
DVD movies via the "AUX INPUT" connectors located at the back of the HD-S25 receiver. (For
connections to DVD player and TV, please refer to CONNECTION TO DVD PLAYER on page 16)
(a) When the HD-S25 receiver is in ON mode:
x
Press "AUX" button on the remote control, the HD-S25 receiver displays the DVD program
and the orange LED indicator (refer to page 7) is turned on
x
Pressing "AUX" button again, make the HD-S25 receiver displays off-air program and the
orange LED indicator (refer to page 7) is turned off.
Notes
1. When the receiver is in AUX mode, the buttons on the remote control and the front panel are
not applicable except "AUX" and "STANDBY/ON".
2. If "
" appears on the TV screen when you press "AUX" button, this means the AUX
function is not permitted when the receiver is connected to TV through RGB.
(b) When the HD-S25 receiver is in STANDBY mode:
If the "AUX IN STANDBY" is set to "ENABLED" (refer to page 36), and the rear panel
MODE-Switch (refer to page 8) is set to YP
receiver is in AUX mode and the orange LED indicator (refer to page 7) is on.

SLEEP

The "SLEEP" button on the remote control is used to set the off-timer value.
To set the off-timer:
x
Press "SLEEP" button to start the timer at "OFF"
x
Next press of "SLEEP" (within 5 seconds) sets the receiver to the next off-timer. Press "SLEEP"
button to set the desired off-timer value
x
The menu turns off after 5 seconds, and the timer starts
OFF 30 min
To check the remaining time:
x
Once the off-timer has been set, press "SLEEP" button once
x
Current remaining time is displayed on the screen, then turns off after 5 seconds
To change the off-timer:
x
Once the off-timer has been set, press "SLEEP" button once
x
Current remaining time is displayed on the screen. Before the OSD turns off, press "SLEEP" button
again within 5 seconds, and the off-timer will be changed to the next bigger off-timer value.
For example, if current remaining time is "28 min", press "SLEEP" button again, and off-timer will be
changed to "30 min".
28 min
OFF 30 min
P before the receiver is switched to standby, the
B R
60 min 90 min
60 min 90 min 120 min
120 min
43