Direct Transmission - continued
On-hook Transmission (Monitor Speaker Dialing)
You can send your documents
with On-hook Dialing using the
monitor speaker to confirm the
answering tone from the re-
mote party's facsimile.
98
1
Load the Document
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
JAN-31 09:43 AM 100%
AUTO RECEIVE
2
Press the MONITOR
Key
Press:
MONITOR
The facsimile is connected to
the telephone line and the dial
tone is heard through the
speaker.
TEL NUMBER=(MAX128)
[
]
3
Dial the Facsimile
Number
Dial the facsimile number of
the remote party using any of
the four dialing methods.
•
One Touch Key Dialing
... See page 89
•
Abbreviated Dialing
... See page 90
•
Alphabet Dialing
... See page 91
•
Keypad Dialing
... See page 92
NOTE:
If an incorrect number is
STOP
dialed, press
and
follow the instruction dis-
played on the LCD display
to start the operation over.
Example of screen displayed
while a number is entered us-
ing Keypad Dialing:
TEL NUMBER=(MAX128)
[0559761234
]
4
Press the START
Key
When you hear the answering
START
tone, press
.
Upon hearing the facsimile
tone, press:
START
When the transmission is com-
pleted, the facsimile returns to
the Standby Mode.
JAN-31 09:43 AM 100%
AUTO RECEIVE