Power Saver Operation - Toshiba ESTUDIO170F Operation Manual

Power Saver Operation

This function allows you to
minimize power consumption
by turning power off to portions
of the machine (as selected).
If the Power Saver function is
ON, a warm up period is
needed before printing occurs.
This facsimile has two Power
Saver modes, Super Energy
Saver and Printer Power Saver.
Super Energy Saver turns virtu-
ally all power off to minimize
power consumption. Select one
of three modes, Automatic,
Manual or OFF.
Printer Power Saver turns only
the fuser section off during the
time period selected.
NOTES:
• When the machine is in the
Super Energy Saver mode,
it will exit from the Super
Energy Saver mode when
any of the following occurs.
- The machine receives a
facsimile,
- External telephone hand-
set is lifted,
- Document is loaded into
the document tray,
SUPER ENERGY SAVER
- is pressed, or
- PC has accessed the
machine.
• Switching to the Super En-
ergy Saver Mode is not
available in the following
cases.
50
- No recording paper,
1
- Document Jam, Record-
ing Paper Jam,
- Cover Open,
Press:
- Toner Cartridge not in-
stalled,
- Toner Empty,
- Process unit not in-
stalled, Process unit life,
- System Error,
- Memory in use,
- Online with PC
2
Display the POWER
SAVER Menu
Select the desired Power
Saver Mode.
MENU
+
+
+
+
Go to Step 3.
POWER SAVER
01.SUPER E.S.
02.PRINTER P.S.
Go to Step 5.
3
Select the Power
Saver Mode
Select the desired Super En-
ergy Saver Option.
+
(to select Super Energy
Saver mode)
SUPER E.S.
2.MANUAL
3.OFF Go to Step 4.
1.AUTOMATIC
In manual mode, you can acti-
vate Super Energy Saver using
+
a key on the Operation Panel.
(to select Printer Power
Go to Step 7.
Saver mode)
PRINTER P.S.
1.ON
2.OFF
Go to Step 7.
NOTE:
Select the Super
Energy Saver Option
(to select Automatic mode)
ENTER TIME
(1-60) [ 3]
(to select Manual mode)
(to select OFF)
If you select OFF, pressing
SUPER ENERGY SAVER
the does not let you
enter the Super Energy
Saver Mode.