Voice Calling - Fujitsu F9600 User Manual

The Voice Calling feature lets you send a brief, voice message to be
heard over another extension's speaker. A two burst tone and your
voice replaces the normal ringing. The receiving extension can
respond to the message by pressing the extension's SPEAKER button
or by using the handset. The Voice Call button can also be used to
provide handsfree auto answer on intercom or transferred calls.
FEATURE BUTTON
To place a voice call instead of ringing:
Action
1. Dial the extension number.
2. Press the voice call button.
3. Leave your message after
service tone ends using the
handset or the SPEAKER.
NOTES
1. You can alternate between the voice calling status and the ringing
status by pressing the voice call button.
2. Only the prime line on a multi-line telephone can be called using
this feature.
To place a voice call allowing handsfree auto answer:
Action
• Dial the desired extension
within your intercom group
or when you are transferring
a call. Press the voice call
button.
Results
You hear ringback.
The voice call lamp flashes.
You hear one second of
service tone.
Result
You hear four seconds of
service tone and the receiving
party may respond handsfree.
161

VOICE CALLING