DAY/NIGHT CHANGE
The Day/Night Change feature is used to change the Day/Night mode
access from an extension. This feature can be used only when there is
no Attendant Console in the system tenant.
To change the mode to Night mode:
Action
1. Lift handset or press SPEAKER.
2. Dial the night mode code
_____.
3. Hang up.
To change the mode to Day mode:
Action
1. Lift handset or press SPEAKER.
2. Dial the day mode code
_____.
3. Hang up.
NOTES
1. If the Day/Night button is assigned to the DT, the lamp will display
while the station is in Night Mode.
2. Changing to the Night Mode while in Night Mode or changing to
the Day Mode while in Day Mode is acceptable
Results
You hear dial tone.
You hear service tone.
Results
You hear dial tone.
You hear service tone.
72