System Tones; Internal Dial Tone; External Dial Tone; Recall Dial Tone - Fujitsu F9600 User Manual

Internal Dial Tone

External Dial Tone

Recall Dial Tone

Busy Tone

Service Tone

Reorder Tone

SYSTEM TONES

You get this tone when you lift the
handset. This tone indicates that you are
free to dial.
This tone is heard when you lift the
handset and dial a code for an outside
line. This tone indicates that you can
place an outside call.
You get this tone when you press flash
during a conversation. It is three short
beeps followed by internal dial tone that
indicates you have properly accessed the
system and can proceed to dial a feature
code.
There are two types of busy tones in the
F9600/F9600c system:
• A standard busy tone (a repetitive
0.5 second tone followed by a 0.5
second pause) indicating that the
number dialed is busy.
• A distinctive busy tone (a repetitive
0.2 second tone followed by a 0.1
second pause) indicating that the
number dialed is busy but that you
can camp-on or override the busy
number, depending on the extension's
class of service.
You get a series of three short beeps after
you request a feature. This tone indicates
that you have successfully accessed the
feature.
This is a fast busy tone that indicates one
of the following three conditions:
• Your extension's class of service does
not include the requested feature.
• You have dialed an incorrect feature
code or number.
• Your extension was left off-hook after
the other party disconnected.
197