Display (Cont'd)
Extension
Facility Restriction
Level (FRL)
Feature Codes
When accessing the Program mode, the
display offers visual instructions about how to
properly program features. All of this display
information appears across the upper and
lower sections of the display panel.
When information regarding call status and
identification is not required, the lower panel
area indicates the current time, day, month,
and date.
Specific information regarding each display
capability is explained in the section of this
guide entitled Display Features.
This is a term that refers to your telephone or
your telephone's number assignment.
This information is programmed into the
system for each extension and provides data
regarding allowable calling routes and priority
for ARS camp-on.
Feature codes, also referred to in this guide as
code(s), are numbers programmed into the
F9600/F9600c that allow a user to register or
cancel a feature. The majority of features that
are available to your extension can be
accessed in one of two ways:
•
Using a programmed button.
•
Entering a specific feature code.
A few features, however, can be accessed in
one way only. For example, a dial intercom
line can be reached only through a button
programmed on your extension.
If a button is not programmed for a desired
feature, access can be obtained by using a
feature code. Each feature is allowed or
disallowed to each extension through system
programming called Class of Service.
192