Functions Used During Calls; Consultation - Siemens HiPath 1100 User Manual

Step by step

Functions used during calls

Consultation

The Consultation feature allows the extension to make
a consultation to a third party when a call is in progress.
At the same time, it prevents the first caller from listen-
ing to the conversation.
Required: A call must be in progress.
d
( )
With standard MF telephones, first press the Flash key.
p
Enter the extension number (e.g. 11/101) or dial the ac-
cess code for an external line (e.g., 0) then the external
number.
w
Wait for the call to be answered.
s
Start a consultation.
To return to the first call...
w
Wait for the consulted party to replace the handset.
If the consultation extension is busy or does not an-
swer, or if you want to return to the first call before
answering...
d
( )
With standard MF telephones, first press the Flash key.
qd
Enter the code to return to the first call.
w
Wait for the call to be answered.
s
Proceed with the conversation.
[1] When the handset is replaced during a consultation, the first call is
transferred to the extension that was consulted.
Functions used during calls
1
29