Hitachi SelecSet 900 Series User Manual page 103

P
RIVACY
Programming
an autodial key
for a private
line
Placing a call
using a private
line
3-16
To program an autodial key for a private line:
1
Lift your handset or press <SPKR>.
2
Dial the private line-register
feature access code.
3
Press the desired autodial key.
4
Enter the private line trunk number (see your system
administrator).
Note: Do not use the station speed calling registration
code to program the autodial key for a private line.
To place a call using a private line:
1
Press the <PRV LN> key. The speakerphone is
automatically enabled.
(You do not have to lift your handset or press
<SPKR>, but you can do either if you want, before
pressing <PRV LN>.
2
The private line LED lights green, indicating that you
are connected.
3
Dial an outside phone number.
Note that you don't have to include the outside access
code, usually 9.
When you place a call using a private line, the display
shows the active CAP, the number dialed, and the
time before the called party answers.
S
ELEC
HCXTD850, Rev. A02, September 2001
S 900 U G
ET SER UIDE