Hitachi SelecSet 900 Series User Manual page 74

Setting up
cover busy/no
answer
Canceling
cover busy/no
answer
Receiving a
covered call
HCXTD850, Rev. A02, August 2001
To set up cover busy/no answer:
1
Lift your handset or press <SPKR>.
2
Dial the internal or external
cover busy/no answer
feature access code or
3
Dial the station number to which your calls will be
directed.
4 Listen for confirmation tone.
5
Calls that are made to your station while you are on a
call or don't answer ring at the specified station
number.
Note: Two different feature access codes are used to
invoke cover busy/no answer for internal and
outside calls. Contact your system
administrator for a list of feature access codes.
To cancel cover busy/no answer, follow these steps:
1
Lift your handset or press <SPKR>.
2
Dial the internal or external
cover busy/no answer
cancellation code.
The information that is shown on your SelecSet 930 or
940 LCD display varies depending on whether the call you
receive is a cover busy or cover no answer call, and how
your telephone system is set up. Following are examples
of cover busy and cover no answer displays.
C C
OVERING ALLS
2-37