Using Do-Not-Disturb - Hitachi SelecSet 900 Series User Manual

U D -N
SING O OT

Using Do-Not-Disturb

Using
do-not-disturb
Soft key menu
Activating
do-not-disturb
Canceling
do-not-disturb
2-44
-D
ISTURB
When you do not want to be interrupted or if you do not
want to answer calls for a while, you can set your phone to
do-not-disturb to prevent calls from ringing at your phone.
When do-not-disturb is active on your phone, callers
trying to reach you hear reorder (special busy) tone.
However, you can still make calls from your phone in the
normal manner.
Note that if you have a SelecSet 930 or 940, you also can
set and cancel do-not-disturb from your soft key menu.
See "Using Do Not Disturb"
To activate do-not-disturb, follow these steps:
1
Press the <DND> (do-not-disturb) key or...
2
Lift your handset or press <SPKR>
and enter the do-not-disturb
feature access code.
Your SelecSet display indicates that DND is activated.
To cancel do-not-disturb, follow these steps:
• Press <DND> or...
• Lift the handset or press <SPKR> and
dial the do-not-disturb cancellation code.
S S
ELEC ET
on page 4-17.
HCXTD850, Rev. A02, August 2001
900 U G
SER UIDE