Basic Tones; Table 5-1 Tone Descriptions; Dial Tone; Asic Ones - Hitachi SelecSet 900 Series User Manual

B T
ASIC ONES
5-2

Table 5-1 Tone descriptions

Tone
Confirmation a series of three quick beeps indicating
tone that a feature operation has been
successfully completed.
Intercept a continuous tone that rises and falls in
tone pitch. It indicates that you have
performed an invalid operation.
Reorder tone a tone, interrupted 120 times per minute,
indicating that all circuits are busy or that
a system resource is unavailable to you
just now.
Recall dial a combination of confirmation tone and
tone dial tone. When you flash your
switchhook to transfer a call or set up a
conference, recall dial tone indicates that
you have been successful and can
continue your operation.
Special similar to normal ringback tone, except
ringback tone the sound level drops at the end of each
ring. You hear this tone when the party
you are calling is busy, but has call
waiting and you are "camped on" waiting
to speak.
S
ELEC
Definition
HCXTD850, Rev. A02, September 2001
S 900 U G
ET SER UIDE