Advertisement
How to Maintain
Saturation Indicator Reset
When flashing 'F' and 'Motor Speed' in the display window alternately,
it means that the grease filters have to be washed.
Press the 'Saturation Indicator' button in order to reset saturation indicator after
washing and installing the filters.
The lighting of the indication button will be off after resetting.
Light Replacement (12V 20W Halogen Lamp)
Unfasten the 2 screws of the lamp support, and pull it out from the body.(Fig.7)
Detach the lamp from the lamp support by pushing the lamp like Fig.8.
Replace the poor lamp with new lamp of the same type.
Make sure that the 2 pins of the lamp should be inserted into the lamp support
properly.
Insert the lamp support into the body, and secure the 2 screws of the lamp support.
When switched on, the halogen bulbs become very hot. Even for some
time after the bulbs have been switched off there is still a risk of burns.
If the light does not function, check that the bulbs have been inserted
correctly.
Fig.7
Fig.8
11
GB
Advertisement
