Advertisement
How to Use (only for DC9202S##)
Function
Display
L
Light
Increase
Motor Speed
P
(1->2->3->P)
(Flashing)
(Flashing)
Decrease
Motor Speed
M
(P->3->2->1->0)
Delay Timer
T
Flashing
Saturation
S
Indicator
'Motor Speed'
alternately
Back
Lighting
-
On
Turns Lighting ON and OFF
First Speed. After running for 5 hours consecutively,
On
1
it automatically turns off.
Second Speed. After running for 5 hours consecutively,
On
2
it automatically turns off.
Third Speed. After running for 5 hours consecutively,
3
On
it automatically turns off.
Intensive Speed
This function become active when doing one of the below 2 ways.
P
1) After pushing the button 'P' for 1 second, release the button.
On
2) Push the button 'P', then the speed level goes up by one step like '1->2->3->P'.
After working for 10 minutes, the speed level goes to the former level.
If you push other button except for 'P' during this function, other function will work.
P
Intensive Speed
On
3
On
Third Speed. After running for 5 hours consecutively, it automatically turns off.
2
On
Second Speed. After running for 5 hours consecutively, it automatically turns off.
1
On
First Speed. After running for 5 hours consecutively, it automatically turns off.
Motor Off
This function become active when doing one of the below 2 ways.
0
On
1) After pushing the button 'M' for 1 second, release the button.
2) Push the button 'M', then the speed level goes down by one step like
'P->3->2->1->0'
The motor operates for 10 minutes when activating this function. After 10 minutes it
will turns off automatically.
2
On
If you increase or decrease the motor speed during this function, this function will be
deactivated.
Indicates that grease filters need to be washed.
'F' and
In order to reset the saturation alarm, push this button again.
On
This alarm works every 100 working hours.
L
P
Display
M
T
S
Descriptions
9
GB
Advertisement
