Installation instructions
Positioning the oven
CAUTION
Never use the oven door to lever the
oven into place when fitting. Avoid
exerting too much pressure on the
oven door when open.
We recommend installing the oven
with the help of a second person.
The base on which the oven is
resting must be complete as shown
in the illustration.
The oven is designed for mounting
into any piece of furniture as long as it
is heat-resistant. The adjacent figure
shows the general dimensions of the
appliance.
For installing under a worktop,
follow the dimensions given in diagram
"page 53 EN, Positioning underneath
worktops".
For under worktop installation, make
sure the back of the cabinet has an
opening of about 60 mm (as shown on
page 53 EN).
To position and fasten a hob above
this oven, see the relevant instructions
enclosed with that type of appliance.
When installing in tall units,
comply with the dimensions shown in
paragraph "page 53 EN, Positioning in
tall units", bearing in mind that the top/
rear of the unit must have an opening
35-40 mm deep throughout the height
of the tall unit and provision for air inlet
situated in the plinth.
52
EN