Philips Fax Machine Manual page 10

Press the empty ink film roll on the left-hand side against the
spring.
Lift the roll upwards on the left side in order to lift it out of its seat.
4
Remove both ink film rolls. They cannot be reused. Dispose of the
ink film rolls with normal waste.
Load a new ink film, because your fax machine cannot work correctly
without it.
Carefully remove the fixing strips from the new ink film. The ink
film must not be damaged.
Hold the ink film so that the large roll is underneath and
the blue gear wheel of the small roll is on the right. Lay the
ink film in the rear ink film compartment by pressing the
right-hand blue end of the large roll against the blue spring
shaft.
Then fit the left-hand black end of the large roll on to the
left-hand shaft.
3
3
2
Now take the small roll and lay it in the grooves provided in the
front ink film compartment.
Turn the gearwheel of the small roll back to tension it. Make sure
that the film is not creased.
4
5
Close the ink film cover by folding it forwards. Make sure that both
release levers are engaged.
Then close the operation panel.
A silver strip is fixed to the start of the ink film, so the quality of
the first few pages may be impaired.