Philips Fax Machine Manual page 9

Insert the other end of the spiral cable into the socket identified with a
handset symbol, on the bottom of the machine, and press it into the
specially provided cable groove.
Please note that the handset must be replaced
before you connect the machine to the power
supply.
Plug the power connector into the back of the fax machine. Plug
the mains cable into the wall socket. The machine will carry out an
internal test. Afterwards you need to enter the current time and
date.
Use the dial pad to enter the correct time. Press OK.
Enter year, month and day. Confirm each entry with OK.
You cannot receive or copy documents unless an ink film is loaded in the
fax machine.
If the ink film is finished or if there is no ink film in the fax machine, the
CHECK DISPLAY lamp flashes, and the following message
appears:
Before loading a new ink film you must remove the paper
from the paper feed mechanism! Also follow the
instructions on your ink film packaging!
To obtain optimum quality, please use only ink films as
specified on your original roll. For safety reasons, do not use
any other brands because they can damage your fax
machine.
Open the machine by carefully lifting the operation panel
at the recess in the middle. If you hear a slight click, the
panel has latched into place.
If, on replacing the ink film, you notice that the colour of the grey
printer roller has discoloured to black, you must clean the roller
(see chapter Troubleshooting / Care and maintenance
instructions).
Open the ink film cover by pressing the blue release levers
back with both hands.
Then carefully fold the ink film cover back.
1
2
1