Philips Fax Machine Manual page 17

S S
S S S
If you only want to use your fax machine in S (U deactivated), press
S/M/U for two seconds, until you hear a confirmation tone and the
pointer above U disappears.
In function 31 you can set the fax reception mode.
Select with </> one of the settings described below and
confirm with OK.
Advantage: the caller only pays call
charges when you answer the phone or
when fax reception begins.
Advantages: You have the option of
receiving faxes on your computer or
another device (the built-in fax switch
is switched off).
Faxes are received automatically after ringing once or twice.
For phone calls, your fax machine acts as a normal telephone and starts to ring immediately.
Other telephones ring as often as the fax
machine.
Faxes are received automatically but only after several signals.
For phone calls, your fax machine acts as a normal telephone and starts to ring immediately.
Other telephones ring as often as the fax
machine.
On receiving a fax, your fax machine acts as a normal telephone. If you lift the handset and recognise
that the caller is trying to send a fax (tone or silence) press START and replace the handset after two
seconds.
For phone calls, your fax machine acts as a normal telephone and starts to ring immediately.
Other telephones ring simultaneously with your fax machine. You can start fax reception by pressing
the keys * and 5 on the other telephone. This mode only works if your telephone sends tone dialling
signals.
You can enter your personal settings here.
You can receive a telephone call on the additional
telephone even after the built-in answering machine has already
been activated. If you have a serial connection, the built-in
answering machine is automatically switched off after lifting the
handset of the other telephone. If your connection is parallel, you
can switch off your outgoing message by pressing * twice.
Other telephones ring once or twice.
Other telephones ring until the (built-in)
answering device is activated or fax reception is
started.