Advertisement
Assembling the glass shelf (continued)
Step 4
Place the glass on the Glass Shelf Supports as shown.
Make sure all the Glass Protector guides are inserted
perfectly into the holes of the left and right Glass Shelf
Supports.
Notes:
z The glass is made of reinforced glass, but dropping
pointed objects on it or strongly hitting the surface may
cause it to break.
z The glass shelf is not fastened to the unit. Avoid han-
dling the glass when transporting the unit, otherwise it
may fall off and there is a risk of damage and injury.
Assembling the Sound bar Support (optional)
You can include your Sound bar system to this unit to enhance the sound of your LCD TV.
Step 1
Fix the wall mount angle (comes with Sound bar
unit) to the Sound bar Support (E) using 4 pieces
of M4 [12mm] screws (L). Fasten them with a "+"
screw driver.
WALL MOUNT ANGLE
(not supplied)
Glass protector
guide
Hole
Step 2
Screw the Sound bar Support (E) to the Sound bar U Bracket
(F) using 4 pieces of M6 [35mm] screws (J) with 4 pieces of
Flange Nuts (M). Insert 8 pieces of Sound bar Spacers (R) as
shown below. Fasten them with M6 Allen key (P).
Notes:
You can omit the Sound bar Spacers (R) if you like but when
you do this, make sure that the screw type is changed from
M6 [35mm] (J) to M6 [16mm] (K)
E-9
Label
R
Advertisement
