Advertisement
Attaching the Back Cover
You can cover the wires at the back by attaching the Back Cover.
Slot in the Back Cover hooks (4 portions) into the LCD Support as
shown.
Peel off the protection sheet at both
sides of the Back Cover.
Cleaning the stand
To remove any stain from the stand, wipe the surface with soft cloth. Do not use chemicals as it may damage the
surface finish.
Specified products
The following products are subject to change without notice.
Certain models may not be available in certain regions.
AN-WS350
AN-WS350R
There may be other models that can be used with this stand. For these models, refer to their operating instructions,
or the supplied leaflet to verify that the stand can be used.
SHARP LCD colour TV
46LE700E
37XL8E
46LE600E
37D65E/DH65E
46HD1E
37X20E
46DH77E
37D44E
46XL2E
32LE700E
46D65E/DH65E
32LE600E
46X20E
32DH77E
46X8E
32SH7E/S7E
42DH77E
32XL8E
42XL2E
32D65E/DH65E
42X20E
32X20E
42SB55E
32RD8E
42SH7E
32SB25E
40LE700E
32DH57D
40LE600E
32D44E
32A47E
E-13
SHARP Sound bar system
HT-SB200
HT-SB300
HT-SB400
HT-SB500
Advertisement
