Advertisement
Attaching the LCD TV Hook to the LCD TV
LCD TV
Max. = 400 mm
If using a Blu-Ray LCD TV (Optional)
Use below TV Spacer to fix the LCD TV hooks.
For upperside TV Spacer fixing:
turn the spacer guide downwards.
U
x 4
Blu-Ray
Compartment
Max. = 400 mm
Note:
The screw holes distance on the
TV for the LCD TV hook should
not exceed 400 mm by 400 mm.
Spacer guide
For lowerside TV Spacer fixing:
turn the spacer guide upwards.
Sharp shall not bear any responsibility
for damages, etc., caused by the LCD
colour TV falling due to insufficient in-
stallation strength or improper installa-
tion.
Screw the LCD TV hooks to the
back of the LCD TV using 4 pieces
of M6 [45mm] screws (V) with 4
pieces of Spring Washers Ø6 (N) or
4 pieces of M8 [45mm] screws (W)
with 4 pieces of Spring Washers Ø8
(O), depending on the TV nut size
N
D
x 4
x 2
as shown. Fasten them using M6
Allen keys (P) or M8 Allen keys (Q).
P
V
x 4
E-11
Step 1
Screw the LCD TV hooks to the
back of the LCD TV using 4 pieces
of M6 [16 mm] screws (K) with 4
pieces of Spring Washers Ø6 (N)
or 4 pieces of M8 [16 mm] screws
(I) with 4 pieces of Spring Washers
Ø8 (O), depending on the TV nut
size as shown. Fasten them using
M6 Allen key (P) or M8 Allen key
(Q).
Caution:
Advertisement
