Motorola M12 Oncore User Manual page 127

Controller ID
cid
Run Command
run
Set Reference Point
refpt
Motorola GPS Products
M12 Oncore User' s Guide Supplement
Revision 1.0 01/25/00
COMMAND DESCRIPTIONS
Function Displays the PC controller software copyright and
version/revision information.
Syntax cid
Example cid<ENTER>
Notes None
Function This command inputs the contents of the specified
file instead of accepting input from the keyboard.
Syntax run [filename]
Example run testfile.dta<ENTER>
Function Enters a reference point or a waypoint to be used to
calculate north, east, and vertical offsets between the
receiver-calculated position and this known reference
position.
Syntax refpt (lat lon hgt g)
Example refpt 33:27:54.207 –111:54:08.444 350.00 g
<ENTER>
Notes None
See Also None
g indicates GPS height
127